On the AN/PRC-160, Morse code is sent in CW mode by switching the radio-frequency carrier on and off to form dots and dashes. The signal’s timing carries the message, while its steady carrier keeps the method clear and efficient for HF communication.

Multiple Choice

Which modulation type is Morse code transmitted using on the PRC-160?

Morse code is sent by turning the RF carrier on and off to create a sequence of short and long pulses. That simple on/off keying keeps the carrier essentially constant in frequency and amplitude while the signal is present or absent, which is exactly what the CW mode provides. In CW, the listener decodes the dots and dashes from the timing of the carrier’s presence, not from changes in frequency or amplitude. The other modes involve altering the carrier in ways Morse code isn’t meant to rely on. Upper/lower sideband modes (USB/LSB) and frequencies-modulated or amplitude-modulated signals introduce changes to the carrier that aren’t needed for Morse timing and would complicate reception and decoding. Morse on a radio is most efficiently and reliably transmitted as continuous wave, hence the correct choice.

Morse Code, CW, and the Antennas Behind Tactical Radio

Morse code can carry a message with just two kinds of marks: short ones and long ones. On an AN/PRC-160, those marks are sent using continuous wave (CW), a mode that turns a radio-frequency carrier on and off in a timed pattern. The idea is simple, but it connects to several important parts of radio work: modulation, receiver design, signal strength, and the antenna that puts energy into the air.

The AN/PRC-160 is a tactical high-frequency (HF) radio, while the AN/PRC-163 is a multiband tactical radio used across a range of communications needs. Their roles and capabilities differ, but the underlying radio principles are shared. A signal still needs a carrier, a way to carry information, and an antenna suited to the frequency and conditions. CW offers a useful lens for seeing how those pieces fit together.

What “continuous wave” means

A radio transmitter creates an electromagnetic signal at a chosen frequency. That signal is the carrier: think of it as a steady tone that can travel through space. In CW Morse, a key or electronic keyer controls whether the transmitter sends that carrier. A short key press makes a “dit”; a longer one makes a “dah.” The pauses between them matter, too. They separate letters and words.

So the information sits mainly in the timing of the carrier’s presence and absence. The transmitter does not need to change the carrier’s frequency to make each dot or dash, nor does it need to vary its strength in the way amplitude modulation does. It keys the carrier on and off according to the Morse pattern.

The name can sound a little puzzling. If the carrier switches off between marks, how is it “continuous”? The term comes from the type of radio wave used, as distinct from systems that carry information by changing frequency or amplitude. The carrier is steady while it is being transmitted. Keying it creates the message.

How a receiver hears the marks

A CW receiver detects the incoming radio signal, but the keyed carrier may not sound like an audible tone by itself. A receiver can add a local signal near the carrier’s frequency, producing a tone the listener can hear when the carrier is present. The tone starts and stops with the Morse marks, making their rhythm clear.

That rhythm is the heart of the message. A listener doesn’t need to hear a different pitch for every letter. Instead, they recognize patterns of short and long signals, along with the spaces between them. It’s a bit like hearing a familiar tune through a wall: some details may be faint, but the pattern can remain recognizable.

Reception quality still depends on real-world conditions. Noise, interference, fading, and poor tuning can make marks harder to distinguish. A clean, steady signal helps, but a capable operator also listens for timing and spacing rather than treating every faint sound as a separate mark. In CW, a fraction of a second can change how a sequence is understood.

Why not use USB, FM, or AM?

USB, or upper sideband, is a form of single-sideband voice transmission. It carries speech by transmitting one sideband while suppressing the carrier. The changing patterns of the speaker’s voice shape the transmitted signal, and the receiving radio reconstructs the audio.

FM, or frequency modulation, carries information through changes in the carrier’s frequency. It’s widely used where its signal characteristics suit the application, including many voice communications systems. AM, or amplitude modulation, carries information through changes in signal strength. Each mode has its own uses, but neither is needed to create Morse dots and dashes.

CW is well suited to Morse because the message is already expressed through timed on-and-off keying. Adding voice-oriented modulation doesn’t improve that basic pattern. That doesn’t mean CW is magically free from bandwidth or signal-quality limits. Any rapid change in a transmitted signal has effects in the frequency domain, and a CW transmission has a spectrum around its carrier. But the core information remains the timing of the keyed signal.

This distinction is useful when thinking about radio modes more broadly: a mode is not just a label on a control panel. It describes how information is represented in the transmitted signal, and the receiving equipment needs to interpret it in a compatible way.

A radio is only half the link

A transmitter can generate a well-formed signal and still have trouble communicating if its antenna is poorly suited to the task. The antenna converts electrical energy in the radio system into electromagnetic waves, and it also converts incoming waves back into electrical signals at the receiver.

Antenna performance depends strongly on frequency. The wavelength of a radio wave is related to frequency: lower frequencies have longer wavelengths, while higher frequencies have shorter ones. A simple quarter-wave antenna, for example, has a length close to one-quarter of the signal’s wavelength. Because HF wavelengths can be long, a full-size antenna may be awkward for a portable radio. Tactical antennas therefore involve practical trade-offs among size, frequency coverage, efficiency, and how easily the equipment can be set up.

Antenna orientation and surroundings matter as well. Nearby structures, vehicles, vegetation, and the ground can affect how an antenna behaves. So can its height and the way it is deployed. A wire that looks like a simple length of metal is part of an electrical system; its performance depends on the radio, the ground or counterpoise, and the environment around it.

Matching the antenna to the signal

The radio and antenna need to work together across the selected frequency. If their electrical characteristics are poorly matched, some transmitted energy may be reflected toward the radio rather than radiated. A system’s standing-wave ratio, often called SWR, is one way to describe this relationship. A high SWR can indicate a mismatch, though it does not by itself explain every problem with a radio link.

A radio may include tuning or antenna-matching functions, depending on its configuration and accessories. These functions help the transmitter work with an antenna system across a range of conditions. They do not make every antenna equally effective at every frequency, though. Matching can help the radio deliver energy to the antenna system; it cannot change a short, inefficient radiator into a physically full-size one.

That’s why antenna selection and setup are operational matters, not afterthoughts. A properly chosen and deployed antenna can support a useful link, while a hurried setup may reduce performance. The same principle applies whether the message is Morse, voice, or data: the antenna must suit the frequency and the environment.

HF brings distance—and variability

HF communications can reach beyond local line-of-sight range because HF signals may interact with the ionosphere, a region of charged particles high above Earth. Under suitable conditions, signals can return toward the surface and travel over long distances. The effect changes with factors such as frequency, time of day, solar activity, and the state of the ionosphere.

That variability is one reason HF is both valuable and demanding. A frequency that works well at one time may not suit another path or hour. Antenna design and placement still matter, but so do propagation conditions—the ways radio waves move through the environment. There is no single antenna or frequency that guarantees the same result everywhere.

CW can be useful in noisy conditions because the listener can focus on a narrow tone and a clear rhythm. Even so, it cannot sidestep the laws of propagation. If a signal fades or interference masks its marks, the message becomes harder to receive. Good radio work brings together the right mode, a sound antenna system, suitable settings, and an understanding of the conditions.

A small signal with a lot behind it

On the AN/PRC-160, Morse code uses CW because the code’s dots and dashes are conveyed by switching a carrier on and off in carefully timed bursts. That’s a straightforward match between the message and the radio mode. USB, FM, and AM represent information in different ways, often suited to voice or other signal formats.

Yet CW is only one piece of the communication link. The receiver must make the keyed carrier audible; the antenna must couple energy into and out of the air; and the frequency must suit the path. Taken together, these ideas show why radio operation is more than selecting a mode. A short burst of Morse may look simple on paper, but it rests on a whole system—one where timing, frequency, equipment, and antenna design all count.