Browse all practice questions for the AN/PRC-160 and AN/PRC-163 Radio Operations and Antenna Theory Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

AN/PRC-160 and AN/PRC-163 Radio Operations and Antenna Theory Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What is the purpose of impedance matching in RF systems?
  • During normal operation, how long can data be held with a Standard Capacity Battery Pack?
  • Which equation is used for link budgeting in RF communications?
  • What is the stated Battery Change Procedure?
  • In a free-space line-of-sight link, which equation correctly yields the received power Pr in dB given Pt, Gt, Gr, and Lp?
  • How long can a CIK stay in the TKL before losing information?
  • What frequency produces a 1-wavelength length of 10 ft?
  • What is the purpose of guard bands in frequency planning?
  • Direct Wave is best described as:
  • What is a primary consequence of a misaligned feed line impedance in a high-speed digital link?
  • In site planning, what does LOS stand for?
  • Unexpected propagation can also shorten the radio path. True or False?
  • What frequency yields a 1-wavelength length of approximately 74.4 ft?
  • What is the 1-wavelength length at 12 MHz?
  • What is the role of impedance matching in avoiding distortion in digital transmissions?
  • Type 1 encryption for the AN/PRC-160 intended for voice and data under TSV is identified by which designation?
  • What does link margin refer to in link budgeting?
  • In mountainous terrain, why is antenna placement critical for line-of-sight communications?
  • Emergency Zeroize Steps require which action on Z1 and Z2?
  • What is the length in feet of a 1-wavelength antenna at 28.0 MHz?
  • What is the difference between squelch and noise blanking in a receiver?
  • How should cryptographic keys be rotated in field radios?
  • Using the quarter‑wave length formula, what is the approximate length in feet for a frequency of 10 MHz?
  • Which channel range overlaps between FIX and 3G?
  • Which action activates the back light on the TKL?
  • The acronym VULOS in this material refers to which concept?
  • What action immediately initiates Emergency Zeroize?
  • Maximum Usable Frequency (MUF) is defined as what?
  • Define intermodulation and its impact on receiver performance in dense RF environments.
  • What is the effect of multipath on radio reception, and how can it be mitigated?
  • Can different classifications be loaded into the KL at the same time?
  • Geomagnetic disturbance is associated with SID and ionosphere storms. What causes increased ionization in polar regions?
  • Which of the following is NOT a recommended step when troubleshooting no audio on receive?
  • TEK stands for?
  • What is the primary effect of increasing antenna height in line-of-sight communications?
  • What condition makes the TKL become Two Person Integrity (TPI)?
  • Which statement accurately describes a ground-plane antenna?
  • TSK stands for?
  • What key operation triggers the back light feature on the TKL?
  • Which power settings are available for VHF operation?
  • What is the function of squelch in a radio receiver?
  • Which of the following is a safety consideration for RF exposure in field operations?
  • Sporadic E occurs when the E layer is excessively ionized and can:
  • Skip zones are defined as the region between:
  • Frequency 24.0 MHz yields a 1-wavelength length of how many feet?
  • The term VULOS is associated with which concept?
  • How do you delete a single key on the TKL?
  • During an antenna check, why is it important to confirm antenna attachment?
  • What does TRKEK stand for?
  • How should messages and keys be handled in field radios with encryption?
  • Which statement is true about the TKL's slot capacity?
  • Name three common antenna types suitable for a manpack radio and give one use case for each.
  • What does MELP stand for in PRC-160 vocoders?
  • Which component or network primarily determines the impedance match between feedline and antenna across the operating band?
  • Ground Reflected Wave reaches the receiving antenna after being:
  • Which two metrics are commonly used to assess receiver performance?
  • Which sequence correctly describes the standard Zeroize procedure?
  • In a link budget, doubling distance increases path loss by approximately how many decibels?
  • RED KEY refers to which of the following?
  • Which antenna type is commonly used for general portable use with a manpack radio?
  • Which step is NOT essential when diagnosing a radio that cannot transmit?
  • What is the length in feet of a 1-wavelength antenna at 7.5 MHz according to the formula 1 wavelength (feet) = 936 / Frequency (MHz)?
  • Who sets the CIK timer?
  • What is the maximum number of keys that can be placed in a single slot on the TKL?
  • Why is proper RF grounding and bonding important for field radios?
  • Which propagation mode involves a radio wave reflected by the ionosphere and returns to Earth?
  • In a reflector–director antenna arrangement, where is the reflector located relative to the driven element?
  • What frequency corresponds to a 1-wavelength length of 1872 ft?
  • In SKL UAS, which action ensures that the key is present?
  • What is required for the TKL to be considered TPI?
  • For the Standard Capacity Battery Pack, what is the data holding time when the SKL is powered down?
  • Explain the concept of duty cycle in transmitter operation and why it matters.
  • Which action is NOT typically part of field radio preventive maintenance?
  • What is polarization and why does it matter for antenna alignment?
  • The recommended site selection practice includes primary, alternate, and LOS sites to maximize efficiency while maintaining security. Is this statement true or false?
  • Which vocoders are supported by the PRC-160?
  • Ionosphere storms typically occur after a solar eruption in what time frame?
  • Regarding expiration date display, which statement is true?
  • Is it permissible to load multiple classifications into the KL simultaneously?
  • What is the significance of a 50-ohm system in RF practice?
  • When viewing a filled TRKEK, which action is first performed?
  • System presets are numbered in which range?
  • What is the length in feet of a 1-wavelength antenna at 3.5 MHz using the same formula?
  • SWR is defined as which of the following?
  • What is a counterpoise in an antenna system?
  • Which of the following accurately lists the five modulation types supported by the PRC-160?
  • Which antenna type is commonly used for mobile or mast-mounted operations due to its ground-plane or top-loaded design?
  • How many slots does the Tactical Key Loader have?
  • Which practice helps minimize interference when selecting operating channels?
  • Bowshock describes the interaction of solar wind with Earth’s magnetic field. Through which structure can charged particles enter the Earth system?
  • To view a filled TRKEK, what sequence should be followed after inserting the CIK?
  • What is the purpose of a dummy load versus an antenna in transmitter testing?
  • The KIK-11 Tactical Key Loader (TKL) is classified as which type of item?
  • How many system presets are available, and how are they identified?
  • Which item is explicitly named as the Simple Key Loader (SKL) in the material?
  • In the Friis transmission equation, Pt(dBW) represents what?
  • What is the 3G channel range?
  • In field operations, how does temperature affect RF components?
  • What is the role of secure, frequency-hopping communications in field radios?
  • What are typical steps for performing preventive maintenance on a field radio?
  • Explain the difference between VSWR and return loss and how they relate.
  • Dwell time in frequency-hopped radios is defined as:
  • If transmitter and receiver polarization are not matched, what is the effect?
  • Which power settings are available for HF operation?
  • WWV broadcasts universal coordinated time on which frequencies?
  • Doubling the frequency from 5 MHz to 10 MHz changes the 1-wavelength length from 187.2 ft to what value?
  • How do you calculate free-space path loss at a given frequency and distance?
  • How does thermal noise affect receiver sensitivity and how can it be mitigated in the field?
  • Why is antenna routing and mechanical support important in the field?
  • Skip Distances refer to the distance on Earth's surface between:
  • What is the effect of increasing antenna height on horizon visibility in line-of-sight communications?
  • What is the maximum number of programmable system presets per channel?
  • What is the duration of the CIK timer?
  • WWV provides time information in what standard?
  • Which expression represents the free-space path loss Lp in decibels for a radio link at distance R with wavelength λ?
  • Sudden ionosphere disturbance (SID) often coincides after a strong solar eruption and produces strong ionization down to which atmospheric layer, potentially causing absorption?
  • In the quarter‑wavelength formula, what is the numerator constant used to calculate length in feet?
  • Which statement best identifies all ground wave components?
  • ETD 10023 is used for which two keys?
  • Which modulation types are supported by the PRC-160?
  • What is the length in feet of a 1-wavelength antenna at 14.0 MHz?
  • Unexpected propagation can cause propagation to extend hundreds of miles beyond the normal range.
  • In MICROGRAM SAASM, which unit provides precise position and time tracking?
  • In the quarter‑wavelength length formula, what unit is used for frequency?
  • Which statement about system presets is true?
  • Which instrument is commonly used in the field to verify antenna resonance by measuring SWR?
  • In sky-wave propagation, a 'one hop' path involves:
  • What is the FIX channel range?
  • What is the LDV function used for?
  • Which statement best describes LOS and beyond-LOS and their impact on radio planning?
  • TKL stands for which term?
  • Explain the basic steps to perform an antenna system check in the field.
  • Lowest Usable Frequency (LUF) is the lowest frequency that will overcome interference for successful communications. What is a consequence if LUF is greater than MUF?
  • What is a radio net and what is the role of a Net Control Station?
  • During the initial check on the TKL, which item should you look for?
  • The field expedient jungle antenna is primarily what type of antenna for VHF operations?
  • TPI stands for which term?
  • In Tactical mode, the maximum keys that can be loaded is:
  • Which encryption key is specifically used to protect traffic as it is transmitted?
  • What is the time limit for replacing the power source to prevent data loss?
  • The antenna gain depends on its design. In transmitting antennas, the goal is high efficiency in radiating energy, while in receiving antennas it is high efficiency in what?
  • Which of the following is NOT a mode of operation on the PRC-160?
  • Which battery pack yields a data holding time of 60 days when SKL is powered down?
  • What is the primary purpose of using a portable SWR bridge during field checks?
  • How would you perform a basic antenna system impedance check using a portable SWR meter?
  • SAASM stands for?
  • What is the maximum number of keys that can be placed in any one TKL slot?
  • How many black keys can the TKL store?
  • What is the purpose of checking SWR after mounting an antenna?
  • In the Friis transmission equation, what does the factor (λ/(4πR))^2 represent?
  • In Strategic Mode, how many keys can be stored?
  • What is the length in feet of a 1-wavelength antenna at 1.5 MHz?
  • Describe the concept of a radiation pattern and how antenna height affects it.
  • What is the primary purpose of an antenna tuner in field radios?
  • Which device must be turned OFF and left off for at least 30 seconds before replacing a low-charged battery?
  • SID can occur during daylight hours and can last for how long?
  • How would you check for antenna resonance in the field?
  • Which element must be confirmed to resolve a radio that cannot transmit?
  • A technician uses a 1-wavelength antenna tuned to 10 MHz. What is the approximate length in feet?
  • Surface Wave is best described as:
  • Define and differentiate between coax loss and total feedline loss in RF systems.
  • What are the two role types in the TKL's role-based access system?
  • What does the KOV-21 warning state if you fail to login 10 consecutive times?
  • Which step involves selecting (*) or ZEROIZE ALL using ▼ during Zeroize?
  • What action is likely taken if interference is detected on a channel during a net?
  • What does TrellisWare TSM-X stand for?
  • Surface Wave travels:
  • Differentiate between dBm, dBW, and dBi; which statement is correct?
  • Which type of batteries are directed not to be used with the TKL?
  • Which statement best describes the effect of a higher noise figure on receiver performance?
  • What is the take-off angle in antenna terminology?
  • Define gain and loss in antenna terminology and how they contribute to link budgets.
  • Which statement best describes antenna gain?
  • In frequency-hopping field radios, how are hop patterns and keys managed?
  • The Tactical Key Loader is classified as what type of crypto device?
  • What are the function knob options on the PRC-160?
  • What is a ground-plane antenna and when would you use one on a field radio?
  • Which item is designated as the Data Transfer Device (DTD) CCI?
  • KEK stands for?
  • What is the first step in the standard Zeroize procedure?
  • Which property among the listed characteristics directly relates to the speed of propagation in a vacuum?
  • Return loss is a measure in dB of how much power is reflected due to impedance mismatch; higher return loss indicates a better match.
  • What is the Net Control Station responsible for in a radio net?
  • Which battery types are commonly used in field radios?
  • Basic Software Applications include which operating system and item?
  • Ionosphere storms can cause which propagation effects?
  • COMSEC material is used to protect communications from unauthorized persons. Which description best matches this statement?
  • What is the operational time for the High Capacity Battery Pack?
  • In a reflector‑director antenna arrangement, where are the reflectors placed relative to the driven element?
  • Which structure can interfere with radio transmissions?
  • Using the half‑wavelength length formula, what is the approximate length in feet for a frequency of 10 MHz?
  • Which function knob option would you use to input ciphertext data?
  • Which elements are included in site selection criteria for the most efficient communication?
  • TSM-X is described as an Extended version of which type of network?
  • How many modes of operation does the PRC-160 support, and what are they?
  • For the High Capacity Lithium-Ion Battery Pack, what is the data holding time when the SKL is powered down?
  • What is the total number of channels listed?
  • What is the required minimum distance from power lines when placing antennas?
  • In link budgeting, how does increasing antenna gain affect transmit power for a given range?
  • Which option is NOT a ground wave component?
  • Frequencies of Optimum Transmission (FOT) are predicted to be usable on most days at what percentage of MUF?
  • Which protocol is used for transmitting data on the TKL?
  • Which are stated as characteristics of radio waves?
  • The ground wave consists of which components?
  • What is the length in feet of a 1-wavelength antenna at 50.0 MHz?
  • In the half‑wavelength length formula, what is the numerator constant used to calculate length in feet?
  • Describe a typical field procedure to attach and detach an antenna on the PRC-160/PRC-163.
  • What is the length in feet of a 1-wavelength antenna at 21.0 MHz?
  • A 1-wavelength antenna is 100 ft long. What is the operating frequency in MHz?
  • Do TrKEK provide a count towards the user key count on the TKL?
  • Detuning in the field is caused by which factors?
  • Which item is the Simple Key Loader (SKL)?
  • Which of the following is NOT a common failure mode when a radio shows 'no power'?
  • In Tactical Mode, how many keys can be received at once (maximum)?
  • What is the purpose of a dummy load when testing a radio transmitter?
  • What is the speed of radio waves?
  • What is the maximum number of roles allowed under Role Based Access?
  • What does a radio wave frequency represent?
  • Before replacing a low-charged battery in the SKL with a higher-charge battery, what should you do first?
  • What does minimum SWR indicate about the antenna system?
  • ETD 10024 is used for which device?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy